Explore Our Services
Heat pumps come in several types, each designed to suit different heating and cooling needs. Here are the main types of heat pumps:
Air source heat pumps are the most common type and work by extracting heat from the outdoor air to warm the indoor space during colder months. In warmer months, the process reverses, allowing the heat pump to cool the space by transferring indoor heat outside. ASHP systems are energy-efficient and relatively easy to install, making them ideal for moderate climates.
Ground source heat pumps draw heat from the ground using a network of pipes buried underground. These systems are highly efficient and can provide a stable source of heat, as the ground maintains a consistent temperature year-round. Geothermal heat pumps are more costly to install due to the excavation required, but they offer substantial energy savings over time, making them ideal for homeowners focused on long-term efficiency.
Similar to ground source heat pumps, water source heat pumps extract heat from a nearby water source, such as a lake, pond, or well. This type is most effective in locations with accessible water bodies, providing a sustainable and efficient heating and cooling solution. Water source heat pumps offer high efficiency but may require specific permits and professional expertise for installation.
Ductless mini-split heat pumps are ideal for homes without ductwork. They consist of an outdoor unit connected to one or more indoor units, allowing for flexible, zoned heating and cooling in different rooms. Ductless systems are energy-efficient, easy to install, and provide individual room temperature control, making them perfect for homes needing targeted climate control.
Hybrid heat pumps combine a heat pump with a backup furnace, often powered by gas. This system automatically switches between the heat pump and the furnace based on outdoor temperatures, maximizing energy efficiency. In milder weather, the heat pump provides the heating, while the furnace takes over during extreme cold. Hybrid systems are well-suited for climates with wide temperature fluctuations.
Absorption heat pumps, also known as gas-fired heat pumps, use a heat source other than electricity, typically natural gas, solar-heated water, or geothermal energy. They’re larger systems often used in commercial settings or larger homes. Absorption heat pumps are efficient and can be a good alternative in areas with higher electricity costs or limited power availability.
Solar-assisted heat pumps use solar energy to enhance the efficiency of the heat pump, combining two renewable energy sources for heating and cooling. While they require solar panels and have a higher initial cost, they offer long-term energy savings and are particularly beneficial in sunny climates.
Selecting the ideal heat pump depends on various factors, including climate, energy costs, installation requirements, and heating or cooling demands. Consulting with an HVAC professional can help you choose the heat pump that best meets your home or building’s needs, providing optimal comfort and energy efficiency. Proper installation and regular maintenance are also essential to ensure the heat pump operates at peak performance, delivering reliable heating and cooling year-round.
A heat pump system includes several essential components that work together to provide effective heating and cooling for your space. Here’s an overview of the main components in a typical heat pump installation:
Evaporator Coil: Located in the indoor unit, this coil absorbs heat from indoor air during cooling or from outdoor air/ground during heating.
Compressor: The compressor, often called the “heart” of the system, is housed in the outdoor unit and pressurizes the refrigerant gas, raising its temperature and energy level.
Condenser Coil: Also in the outdoor unit, this coil releases heat absorbed from indoor air (in cooling mode) or from outdoor air/ground (in heating mode) into the external environment.
Expansion Valve: This component reduces refrigerant pressure, allowing it to expand and cool down rapidly, making it ready to absorb heat from the air or ground.
Refrigerant: The refrigerant circulates through the heat pump, changing states from low-pressure gas to high-pressure gas as it absorbs and releases heat.
Air Handler (Indoor Unit): Contains the evaporator coil and fan, circulating conditioned air throughout your space. In ductless systems, it’s directly mounted in the room.
Outdoor Unit (Condenser): This unit contains the compressor, condenser coil, and a fan that disperses absorbed heat from indoor air (in cooling mode) or releases it to the outdoor air/ground (in heating mode).
Reversing Valve: This valve switches the direction of refrigerant flow, enabling the heat pump to switch between heating and cooling modes.
Thermostat: Controls the heat pump, allowing you to set your desired temperature and toggle between heating and cooling modes.
Air Filter: Removes dust and other particles from indoor air before it’s conditioned, promoting cleaner indoor air quality.
These components continuously cycle to transfer heat effectively, making heat pumps an efficient solution for indoor climate control. Depending on the specific heat pump model, component configurations may vary.
To keep your heat pump running efficiently and prolong its life, regular maintenance is essential. Here are some key maintenance tips:
Regular Inspections: Schedule annual inspections with a qualified HVAC technician, ideally before peak heating or cooling seasons, to detect potential issues early.
Clean or Replace Filters: Check and clean/replace air filters every 1-3 months to prevent restricted airflow and improve indoor air quality.
Keep Outdoor Unit Clear: Ensure the outdoor unit is free from debris, dirt, and obstructions to allow proper airflow for efficient operation.
Check Thermostat Settings: Periodically calibrate your thermostat to ensure accurate temperature control and avoid unnecessary system strain.
Inspect and Clean Coils: Dust and debris can reduce coil efficiency, so gently clean indoor and outdoor coils to ensure effective heat exchange.
Check Refrigerant Lines: Look for any signs of leaks or damage to refrigerant lines, as leaks can decrease efficiency and harm the system.
Inspect Electrical Connections: Faulty connections can lead to inefficiency or system failure, so check for any loose or damaged connections.
Test Defrost Mode (Winter): In cold climates, test the defrost mode to prevent ice buildup on the outdoor unit’s coils.
Balance Airflow: Ensure that supply and return registers are unobstructed for balanced airflow and improved efficiency.
Monitor Performance: Address unusual noises, odors, or performance changes promptly to avoid more significant issues.
Insulate Properly: A well-insulated home helps reduce system workload by retaining heat in winter and keeping cool air in during summer.
Routine maintenance not only boosts your heat pump’s performance but also saves on energy bills and minimizes the risk of costly repairs. Some tasks, especially electrical checks, should only be handled by qualified professionals.
For additional HVAC and boiler repair services, explore our range of expert solutions.
Year-round comfort starts with the right installation. We make it easy, efficient, and built to last.
Looking to enhance your home’s comfort and energy efficiency? Our expert heat pump installation services provide a reliable solution for year-round climate control.
Looking for a smarter way to heat and cool your home? Heat pumps are energy-efficient, eco-friendly, and work all year long—keeping you warm in winter and cool in summer, all while lowering your energy bills.
Experienced Technicians: Our team has extensive experience in heat pump installations.
Quality Equipment: We use top-rated heat pump brands known for reliability.
Customer Satisfaction: Our goal is to exceed your expectations with every installation.
When you choose Angels Heating & Cooling, you’re getting more than just an install—you’re getting peace of mind. Our certified HVAC pros take care of:
Evaluating your home and sizing the system right
Recommending the best heat pump for your needs
Full installation—indoor, outdoor, electrical, and ductwork
Post-installation testing and optimization
Clean-up and walkthrough—you’re never left in the dark
At Angels Heating & Cooling, we follow a comprehensive installation process to ensure optimal performance:
We evaluate your home’s size, insulation, and existing HVAC system to recommend the best heat pump solution.
Based on the assessment, we help you choose a heat pump that fits your needs and budget.
Our certified technicians install the heat pump, ensuring all components are correctly connected.
We test the system to confirm it’s operating efficiently and safely.
We provide guidance on operating and maintaining your new heat pump for long-term performance.
Your new heat pump is installed—now what? To keep it running efficiently for years to come, a bit of care goes a long way. At Angels Heating & Cooling, we don’t just walk away after installation—we’re here for the long run.
Here’s how to protect your investment:
Schedule Regular Maintenance: Book annual tune-ups (ideally before summer or winter). Our technicians check refrigerant levels, clean coils, test controls, and ensure everything is running at peak performance.
Keep Filters Clean: Dirty filters restrict airflow and reduce efficiency. We recommend checking and replacing them every 1–3 months, depending on usage and indoor air quality.
Clear Outdoor Units: Make sure your outdoor condenser isn’t blocked by leaves, snow, or debris. Good airflow means better performance.
Use Smart Thermostats Wisely: Avoid frequent setting changes, which can make your system work harder. Set it and let it run consistently for the best results.
Know the Warning Signs: Strange noises, weak airflow, or sudden spikes in your energy bill? Don’t ignore them. Early intervention can save you from major repairs.
Not sure what system suits your home? No worries. We’ll guide you through:
Air Source: Fast to install, cost-effective, perfect for milder climates
Ground Source (Geothermal): Super-efficient and durable—ideal for long-term energy savings
We keep things smooth and simple:
Home inspection & custom plan
Choosing the best location for equipment
Installation day!
Testing & performance checks
Final walk-through + tips for getting the most out of your system
Replace filters every few months
Keep the outdoor unit clear of leaves and debris
Schedule annual maintenance with us
Pay attention to any unusual noises or temperature drops
Heat pumps are an energy-efficient alternative to traditional heating and cooling systems. They offer:
Year-Round Comfort: Efficient heating in winter and cooling in summer.
Energy Savings: Lower utility bills due to high efficiency.
Environmental Benefits: Reduced carbon footprint
This is typically for:
New homes or buildings
Homes switching from a furnace or other HVAC system
Renovations or home additions where no previous heat pump existed
What to expect: A complete setup from scratch—including electrical hookups, possible ductwork installation, and choosing the right size and type of unit. It’s a fresh start with maximum efficiency potential.
This is best when:
Your current heat pump is over 10–15 years old
You’re facing frequent, costly repairs
The unit is underperforming and causing high energy bills
Q: How long does it take to install a heat pump?
A: Most installations take 1–2 days.
Q: Will this replace my old furnace or AC?
A: Absolutely—heat pumps can replace both!
Q: Do you pull permits?
A: Yes. We handle everything so you don’t have to.
Q: Is it noisy?
A: Nope. Modern systems are whisper quiet.
Let’s make your home comfier, cleaner, and more energy-efficient. Contact Angels Heating & Cooling today to schedule your heat pump installation.
📱 Call us at 604-924-7396 or request a free estimate online
